How to setup your X3 Device (Written Instructions)

Step One - Attach Antenna
Make sure the included WiFi antenna is secured onto the Generate X3 Device.
device-side-antenna
device-antenna

Step Two - Connect the HDMI
Connect the included HDMI cable to the Generate X3 Device. Run the opposite end of this cable, and connect, to the desired HDMI input on your TV.
device-side-hdmi
device-hdmi

Step Three - Connect To Power
Connect the included power cable to the Generate X3 Device. This cable is a USB-C cable and connects to the USB-C input on the X3 device marked 5V.
device-side-power (1)

Step Four- Connect Your IR Receiver
Connect the IR receiver to the device. This is used to communicate with your remote so placement is key. Make sure the placement of the IR receiver is visible as to allow your remote to easily connect to it.
device-side-power
Screen Shot 2023-01-12 at 3.35.48 PM

Step 5 - Power on Your Device
When all cables are connected correctly, turn your TV on and change your input to the HDMI input that your Generate X3 Device is plugged into. You should see your device automatically power on.